Best Integrated Amplifier Under $1000

TEAC AI-503 Reference Bluetooth DSD DAC / Integrated Amp / Preamp / Headphone Amp (Black)
  • USB DAC with a dual-mono configuration that supports resolutions up to 11.2MHz DSD and 384kHz/32bit PCM. Bluetooth receiver supports LDACTM/Qualcomm aptXTM for high quality wireless audio quality. Headphone jack supports 3.5mm 4-pole separate ground connection. Combined stereo mini/optical digital jack on front panel, convenient for connecting digital audio players. Pre-amp section provides fully balanced transmission and uses TEAC-QVCS high-precision volume control circuit.
  • High-output Class-D power amplifier (made by ICEpower a/s). Switchable filter types, including 4 PCM and 2 DSD digital filters. Pre-out jacks can be connected to both power amplifiers and active speakers. Two pairs of analog RCA inputs, as well as USB, optical and coaxial digital inputs (one each) on back panel. Dual analog level meters with adjustable brightness.
  • Separate VERITA AK4490 D/A converters made by Asahi Kasei Microdevices Corporation used on left and right channels. Filter type can be switched, choosing from 2 DSD digital filters, as well as 4 PCM filters and off mode. Two built-in high-precision dedicated clocks for 44.1kHz and 48kHz signals and their multiples (enabled during USB asynchronous transmission). Headphone amp with discrete, push-pull circuit and a maximum output of 280mW+280mW (TEAC-HCLD circuit). Compliant with RoHS.
  • Ground connection supported by 3.5mm 4-pole stereo headphone jack (combined with regular 3.5mm stereo mini type). High-capacity toroidal-core power transformers. Pair of RCA analog input jacks. Volume-controlled pair of RCA analog output (pre-out) jacks. USB/coaxial/optical digital inputs (one each on back panel).
  • Combined round optical digital/3.5mm stereo mini jack (on front panel). Dual analog level meters with adjustable brightness. Low-energy consumption design and automatic power-saving function. All-metal enclosure provides both vibration resistance and a stylish appearance in an A4-page-sized footprint that can fit on a desk. Dedicated remote control included. IEC inlet.

Rega - Brio - Integrated Amp - Black
  • Fully aluminium two-part case which boosts the Brio's heat sinking capabilities
  • Cleverly integrated headphone socket specially designed to avoid interference
  • Very high specification moving magnet phono stage is built in as standard
  • PCB layout has been fully upgraded to handle higher specifications for all critical parts
  • Second raw power supply has been added to provide further isolation

Teac AX-501-B Integrated Amplifier (Black)
  • ALC0240 Class-D Power Amplifier by ABLETEC
  • A fully-balanced approach used for the analog circuits on the pre-amplifier
  • Maximum 120W + 120W of output power for practical use (at 4ohms impedance)
  • Dual analog level meters with dimmable backlight
  • No Cooling-Fan, for Quiet Operation Efforts to eliminate noise and ensure high-quality audio

Yamaha A-S801BL Natural Sound Integrated Stereo Amplifier (Black)
  • 100 W + 100 W (20 Hz - 20 kHz, 0.019% THD)
  • USB DAC function: DSD (2.8 MHz / 5.6 MHz), PCM (384 kHz / 32-bit), WAV / FLAC
  • Gold plated digital coax input/TOSLINK optical input.Frequency response-10 Hz - 100 kHz +/- 1.0 dB
  • Gold plated analog inputs including Phono
  • Speakers A, B, A+B

Yamaha A-S701SL Natural Sound Integrated Stereo Amplifier (Silver)
  • 100 W + 100 W (20 Hz - 20 kHz, 0.019% THD)
  • Gold plated digital coax input/TOSLINK optical input
  • Gold plated analog inputs including Phono
  • Speakers A, B, A+B
  • Auto standby (8 hours)

Marantz Hi-Fi Integrated Amplifier (PM6006)
  • Integrated Current Feedback Amplifier with 2x 45W / 8 ohm rms. High quality DAC CS4398 and Marantz HDAM SA2
  • Digital inputs to expand the connectivity of various audio player
  • Gold Plated Inputs/Outputs incl. Phono (MM) input
  • Wider dynamic range with lower distortion for the output stage
  • Toroidal Transformer and high quality customized components

ADCOM GIA-275 Bluetooth DAC Integrated Amplifier
  • Bluetooth wireless audio technology.
  • USB audio input.
  • Power 80 Watts x 2.
  • Coaxial and optical digital audio inputs.
  • Remote control.

YAQIN MC-13S Push-Pull Integrated Stereo Tube Amplifier(Without Protect Cover)
  • MC-13S is the latest upgraded version of MC-10L. It is powered by Yaqin 6CA7T tubes which are better than Shu Guang EL34B in sound quality
  • An analog VU meter on the front panel to monitor the average of the two channel output levels
  • Class A push-pull power amplifier to reduce distortion
  • Ultra linear push-pull amplifier provides greater output power
  • Caution : the product don't have plastic cover. To ptotect the amp,tube and machine are packed individually. Please click: to buy the one with plastic cover

Gemtune MC-10T EL34BX4 Hi-Fi Integrated Push-Pull Tube Amplifier
  • Powered by EL-34B tubes.
  • SRPP preamp circuit product wider frequency response and low distortion
  • Adopt ultralinear push-pull amplifier circuit to produce enough power to push low frequence.
  • Output transformer is made by Japan audio-specific oriented silicon steel sheet(0.35mm) and free-oxygen high-intensity enameled wire,To insure wide frequency response and bright tremble and bass
  • Adopt audio-grade Electrolysis and Philips MKP AC capacitor Make it low-noise,quite music background and durable.

Review Date
Author Rating

You might also like More from author

Leave A Reply

Your email address will not be published.