Cheap 2018 Turntable Under $2000

Sale
Thorens TD 295 MK IV Semi-Automatic Turntable - 33, 45rpm AT95E (Piano Black)
2 Reviews
Thorens TD 295 MK IV Semi-Automatic Turntable - 33, 45rpm AT95E (Piano Black)
  • In the TD 295 MK IV, technical finesse and first-rate sound go hand in hand with elegant appearance. It is based on tried and tested components, which are complemented by the new TP 41 tonearm. The warm wooden colours of the plinth may be freely combined with either classic or contemporary furniture styles in order to have this record player stand out in any room. Indeed an elegant classic at its best.

Thorens TD 206 Manual Turntable - 33 or 45 rpm TP90 AT95B (High Gloss Black)
2 Reviews
Thorens TD 206 Manual Turntable - 33 or 45 rpm TP90 AT95B (High Gloss Black)
  • Low Noise, Low Voltage electronically speed controlled DC Motor
  • Adjustable belt tension for best performance
  • Two-part aluminium/acrylic platter
  • New TP 90 tonearm with precision Japanese bearings
  • Tonearm adjustable for VTA, azimuth and overhang

Pro-Ject - 1Xpression Carbon Classic - Turntable - Mahogany
1 Reviews
Pro-Ject - 1Xpression Carbon Classic - Turntable - Mahogany
  • Belt-drive system with synchronous motor
  • Heavy aluminum sandwich platter with TPE technology for superior resonance damping
  • 8.6 carbon tonearm with Evo Kardan rings
  • Advanced Ortofon 2M Silver cartridge included
  • Felt mat included

Sale
Thorens TD206 Gloss White Turntable
2 Reviews
Thorens TD206 Gloss White Turntable
  • Low Noise, Low Voltage electronically speed controlled DC Motor
  • Adjustable belt tension for best performance
  • Two-part aluminium/acrylic platter
  • New TP 90 tonearm with precision Japanese bearings
  • Tonearm adjustable for VTA, azimuth and overhang

Sale
Thorens TD206 Gloss Red Turntable
2 Reviews
Thorens TD206 Gloss Red Turntable
  • Low Noise, Low Voltage electronically speed controlled DC Motor
  • Adjustable belt tension for best performance
  • Two-part aluminium/acrylic platter
  • New TP 90 tonearm with precision Japanese bearings
  • Tonearm adjustable for VTA, azimuth and overhang

Music Hall IKURA Black Turntable with Ortofon 2M Blue Cartridge
3 Reviews
Music Hall IKURA Black Turntable with Ortofon 2M Blue Cartridge
  • Music Hall introduces ikura, a design collaboration between Doing & Done represents a visual and technical departure. The result is a unique high-end, gloss black split design with a MDF platter coated in a high-gloss finish belt driven audiophile master piece. Three rubber cone feet elevate and isolate the plinth, under which all connections, electronics are mounted underneath. Critical listening components are kept separated on the top of the turntable to ensure sound quality is maintained.
  • For the first time, music hall collaborated with an outside industrial design firm to develop and complete the project. The foundation of ikura's gloss black design remains the unique two-piece split-plinth design originated by music hall and the final product is the result of a dynamic design partnership between Doing & Done, headed by designer James Kyroudis, and music hall.
  • The medium density fiberboard platter and felt mat rides a high quality, stainless steel ball bearing coated in Teflon providing fluid and noise-free operation. Initial lubrication of the bearing assembly is done during factory assembly.
  • The tonearm measures at nine inches in length. This keeps the tracking arc shallow and reduces opportunity for distortion and record wear. The tonearm comes mounted with a high quality moving magnet cartridge and features Swiss made ABEC 7 stainless steel bearings.
  • Each element of the gloss black ikura was carefully selected to provide you with the highest level of performance and sound quality. Used properly, the ikura will provide you with years of musical enjoyment.

Hankscraft 1263 Battery-Powered Turntable Display Motor, Black (#9200009900) (96-Pack)
2 Reviews
Hankscraft 1263 Battery-Powered Turntable Display Motor, Black (#9200009900) (96-Pack)
  • 4" diameter rotating top disk
  • Max load 6 lbs
  • 4 RPM clockwise rotation
  • On/off switch
  • Built-in "D" cell battery holder (batteries not included)

Pro-ject The Classic Sub-chassis turntable with 9“ carbon/alu sandwich tonearm- Eucalyptus
3 Reviews
Pro-ject The Classic Sub-chassis turntable with 9“ carbon/alu sandwich tonearm- Eucalyptus
  • Sub-chassis turntable with 9" carbon/alu sandwich tonearm
  • Belt drive with electronic speed control 33/45 rpm
  • Precision balanced TPE*-damped aluminium-platter / felt mat
  • Japanese ball bearing (base of tonearm)
  • 9" carbon/aluminium tonearm with MM & MC capability

Rega RP6 Turntable with Exact 2 Cartridge, RB303 Tonearm, TTPSU Power Supply, Dust Cover (Gloss Black)
1 Reviews
Rega RP6 Turntable with Exact 2 Cartridge, RB303 Tonearm, TTPSU Power Supply, Dust Cover (Gloss Black)
  • GLOSS BLACK - INCLUDES EXACT 2 CARTRIDGE, MANUAL, TTPSU POWER SUPPLY, DUST COVER
  • The RP6 has been designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. Excellent build quality, reliability and ease of use combine to make a product which, if used correctly, will offer you a lifetime of musical enjoyment. Omitting unnecessary gimmicks allows us to concentrate the manufacturing costs on the high quality parts necessary to reproduce music accurately.
  • The RP6 is fitted with a hand assembled RB303 tonearm, precision main bearing and a low vibration low noise 24v motor assembly which is individually hand tuned to its circuit to further reduce vibration. The minimalist design of the Rega RP6 and the use of extremely high quality components ensure that your turntable should last for many years.
  • The compact TT-PSU uses a high stability crystal locked low distortion sine wave generator. This, along with an efficient drive amplifier fed from a stabilised DC power supply, generates a 24V AC balanced signal of less than 0.05% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the improved Rega anti-vibration circuit built into the RP6 motor PCB.
  • Designed using the latest 3D CAD technology the new RB303 is the culmination of more than 30 years of tonearm design experience. Due to advances in technology we have been able to fine tune the iconic RB300 tonearm design. Featuring a brand new tube which has increased rigidity to the bearing housing, arm carrier and headshell coupled with intelligent redistribution of mass, ensure this arm will exhibit fewer points of possible resonance.
Summary
Review Date
Author Rating
51star1star1star1star1star

You might also like More from author

Leave A Reply

Your email address will not be published.

Open